Reference Guide

Property Description
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning. A
value other than 5 or 12 identies the state to which the element is
in the process of transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in-progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not
support representing ongoing transitions
DCIM_Slot
Property
Description
ConnectorLayout
Describes the type of packaging normally associated with this type
of connector.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = RS232
• 3 = BNC
• 4 = RJ11
• 5 = RJ45
• 6 = DB9
• 7 = Slot
• 8 = SCSI High Density
• 9 = SCSI Low Density
• 10 = Ribbon
• 11 = AUI
• 12 = Fiber SC
• 13 = Fiber ST
• 14 = FDDI-MIC
• 15 = Fiber-RTMJ
• 16 = PCI — Describes the generic PCI connector layout.
Dell Command | Monitor10.1.0 classes and properties
71