Reference Guide

DCIM_RemoteServiceAccessPoint
Property Description
AccessContext
The AccessContext property identies the role this
RemoteServiceAccessPoint is playing in the hosting system.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Default Gateway
• 3 = DNS Server
• 4 = SNMP Trap Destination
• 5 = MPLS Tunnel Destination
• 6 = DHCP Server
• 7 = SMTP Server
• 8 = LDAP Server
• 9 = Network Time Protocol (NTP) Server
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
AccessInfo
Access or addressing information or a combination of this
information for a remote connection. This information can be a host
name, network address, or similar information.
CreationClassName
Indicates the name of the class or the subclass used in the creation
of an instance. When used with the other key properties of this
class, this property allows all instances of this class and its
subclasses to be uniquely identied.
ElementName
A user-friendly name for the object. This property allows each
instance to dene a user-friendly name in addition to its key
properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is
also dened as a user-friendly name. But, it is often sub-
classed to be a Key. It is not reasonable that the same
property can convey both identity and a user-friendly
name, without inconsistencies. Where Name exists and is
not a Key (such as for instances of LogicalDevice), the
same information can be present in both the Name and
ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup
conguration for the Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Oine
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
68 Dell Command | Monitor10.1.0 classes and properties