Reference Guide
Property Description
• 10 = Reboot — Refers to doing a Shut Down and then moving
to an Enabled state.
• 11 = Reset — Indicates that the element is rst Disabled and
then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
Security
An enumeration indicating the operational security for the
Controller. For example, information that the Device's external
interface is locked out (valuemap = 3) or Boot Bypass (valuemap =
5) can be described using this property.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = None
• 3 = External Interface Locked Out
• 4 = External Interface Enabled
• 5 = Boot Bypass
• .. = DMTF Reserved
• 32768.. = Vendor Reserved
Speed
The bandwidth of the Port in Bits per Second.
SystemCreationClassName
The creation class name of the scoping system.
SystemName
The system name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not
support representing ongoing transitions.
A value other than 5 or 12 identies the state to which the element
is in the process of transitioning.
Dell Command | Monitor10.1.0 classes and properties 67