Reference Guide

Property Description
InstanceID
This property contains the value of the Fully Qualied Device Description
(FQDD).
PrimaryStatus
This property represents the status of the device.
Possible values are:
• 0 = Unknown
• 1 = OK
• 2 = Degraded
• 3 = Error
ProductName
This property represents the family name of the controller.
DCIM_PhysicalDiskView
Property Description
ElementName
A user-friendly name for the object. This property allows each
instance to dene a user-friendly name in addition to its key
properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is
also dened as a user-friendly name. But, it is often sub-
classed to be a Key. It is not reasonable that the same
property can convey both identity and a user-friendly
name, without inconsistencies. Where Name exists and is
not a Key (such as for instances of LogicalDevice), the
same information can be present in both the Name and
ElementName properties.
InstanceID
The property contains the value of the Fully Qualied Device
Description (FQDD).
PrimaryStatus
This property represents the status of the device.
Possible values are:
• 0 = Unknown
• 1 = OK
• 2 = Degraded
• 3 = Error
• 4 = Rebuilding
• 5 = Oine
• 0x8000 = DMTF Reserved
• 0xFFFF = Vendor Reserved
DriveUsage
This property indicates if the physical disk is in a RAID set.
Possible values are:
• 0 = Not in a RAID Set
• 1 = In a RAID Set
• 2 = Hot Spare
Model
This property represents the model name of the physical disk.
Dell Command | Monitor10.1.0 classes and properties 57