Reference Guide

Property Description
SystemCreationClassName
The creation class name of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does
not support representing ongoing transitions.
A value other than 5 or 12 identies the state to which the element
is in the process of transitioning.
DCIM_ControllerView
Property
Description
BusType
The property represents the type of the PCI bus.
Possible values are:
• 0 =Unknown
• 3 = PCI Bus
• 4 = PCMCIA Bus
• 0x8000 = DMTF Reserved
• 0x = Vendor Reserved
ControllerFirmwareVersion
This property represents the rmware version.
Device
This property represents the device name.
Driver Version
This property represents the version of the driver.
ElementName
A user-friendly name for the object. This property allows each instance to
dene a user-friendly name in addition to its key properties, identity data, and
description information.
NOTE: The Name property of ManagedSystemElement is also
dened as a user-friendly name. But, it is often sub-classed to be a
Key. It is not reasonable that the same property can convey both
identity and a user-friendly name, without inconsistencies. Where
Name exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in both the
Name and ElementName properties.
56 Dell Command | Monitor10.1.0 classes and properties