Reference Guide

Property Description
• 11 = Reset — Indicates that the element is rst Disabled and then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SystemCreationClassName
The creation classname of the scoping system.
SystemName
The system name of the scoping system.
TOEEnabledState
An integer enumeration that indicates the enabled and disabled states of the TOE.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the TOE is enabled and running.
• 3 = Disabled — Indicates that the TOE is disabled.
• 4 = Not Applicable — Indicates that the ethernet port does not have TOE capability.
• 5..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does not support representing ongoing
transitions.
A value other than 5 or 12 identies the state to which the element is in the process of transitioning.
DCIM_FlatPanel
Property
Description
Brightness
The percentage (0 – 100) of total brightness of the video output device for system running
on battery and AC power. The property is in the format BatteryBrightness:ACBrightness
BuiltIn Denes whether the video output device is built in. True indicates that at panel is
directly attached to a portable computer and False means that at panel is externally
connected through graphics cable (such as VGA) to a computer.
Possible values are:
• 0 = Unknown
• 2 = True
Dell Command | Monitor10.1.0 classes and properties 47