Reference Guide

Property Description
SystemName
The system name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does
not support representing ongoing transitions.
A value other than 5 or 12 identies the state to which the element
is in the process of transitioning.
VeryLowPowerSupported
This property represents if the video output device can go into a
low power mode.
Possible values are:
• 0 = Unknown
• 2 = Supported
• 3 = Not Supported
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
DCIM_DHCPProtocolEndpoint
Property
Description
ClientState
ClientState represents the current state of the DHCP client. See RFC1541 for more
information on the meaning of each state.
Possible values are:
• 0 = Unknown
• 1 = DMTF Reserved
• 2 = Init
• 3 = Selecting
• 4 = Requesting
• 5 = Rebinding
• 6 = Init-Reboot
• 7 = Rebooting
• 8 = Bound
• 9..32767 = DMTF Reserved
36 Dell Command | Monitor10.1.0 classes and properties