Reference Guide

Dell Command | Monitor Event (Windows
Event Log Number)
Description
VirtualDiskRebuilding (1822)
A virtual hard-disk drive is rebuilding.
VirtualDiskFailed (1823)
A virtual hard-disk drive has failed.
VirtualDiskOine (1824)
A virtual hard-disk drive is oine.
NumberOfDisksIncreased (2030)
A hard-disk drive has been added.
NumberOfDisksDecreased (2031)
A hard-disk drive has been removed.
MemorySizeIncreased (2032)
The memory size has been increased.
MemorySizeDecreased (2033)
The memory size has been decreased.
DiskCapacity (2034)
In the current version, two user-dened thresholds are used. An event is generated only
when the conditions of both thresholds are met. The rst threshold, expressed as an
absolute value in megabytes, species the size of the hard-disk drive to be monitored. Hard-
disk drives with a capacity smaller than the specied size are ignored. The second threshold
is expressed as a percentage of the hard-disk drive size. An event is generated when the
available free space on one of the monitored hard-disk drives falls below this percentage
NumberOfProcessorsIncreased (2035)
Number of processors on the system has increased
NumberOfProcessorsDecreased (2036)
A processor has been removed.
HDD Smart Failure(2037)
• A hard-disk drive condition has occurred that may eventually lead to a hard-disk drive
failure.
• Error message is displayed when the current value exceeds the threshold value.
• Warning message is displayed when the current value exceeds the custom threshold
value.
NOTE: Extended Error and Warning messages are supported only on Embedded
box PC 3000/5000.
DiskSizeIncreased (2038)
The size of at least one hard-disk drive has increased.
DiskSizeDecreased (2039)
The size of at least one hard-disk drive has decreased.
312 Alerts in Dell Command | Monitor10.1.0