Reference Guide

Property Description
these requested states. For example, shutting down (value = 4) and
starting (value = 10) are transient states between enabled and
disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be
executing commands, will process any queued commands, and
queues new requests.
• 3 = Disabled — Indicates that the element will not run
commands and drops any new requests.
• 4 = Shutting Down — Indicates that the element is in the
process of going to a Disabled state.
• 5 = Not Applicable — Indicates that the element does not
support being enabled or disabled.
• 6 = Enabled but Oine — Indicates that the element may be
completing commands, and drops any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but queues any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
FrequencyH
This property is a horizontal synchronization signal frequency in Hz
as determined by the display.
FrequencyV
This property is a vertical synchronization signal frequency in Hz as
determined by the display.
HealthState
Indicates the current health of the element. This attribute expresses
the health of this element but not necessarily that of its
subcomponents.
Possible values are:
• 0 = Unknown — The implementation cannot report on
HealthState now. DMTF has reserved the unused portion of the
continuum for additional HealthStates in the future.
• 5 = OK — The element is fully functional and is operating within
normal operational parameters and without error.
• 10 = Degraded/Warning — The element is in working order and
all functionality is provided. However, the element is not working
to the best of its abilities. For example, the element may not be
operating at optimal performance or it may be reporting
recoverable errors.
• 15 = Minor failure — All functionality is available but some may
be degraded.
• 20 = Major failure — The element is failing. It is possible that
some or all of the functionality of this component is degraded or
not working.
• 25 = Critical failure — The element is nonfunctional and
recovery may not be possible.
• 30 = Non-recoverable error — The element has failed, and
recovery is not possible. All functionality provided by this
element has been lost.
30
Dell Command | Monitor10.1.0 classes and properties