Reference Guide

BIOS Settings Name Description Supported Operating
System(s)
Secure Boot
The BIOS performs a Secure Boot authentication while attempting to boot from a
UEFI partition. It refers to this setting to decide on the POST behavior.
Possible values are:
Enable — When enabled, BIOS only performs Secure Boot and boot in UEFI
mode without loading the Compatibility Support Model (CSM).
NOTE: You can disable secure boot only from the BIOS setup screen.
Microsoft Windows,
Linux
Secure Boot Mode
Congures the Secure Boot Mode.
Possible values are:
Deployed ModeAudit Mode
Audit Mode
Microsoft Windows,
Linux
Secure Boot Policy
Congures the secure boot policy.
Possible values are:
Standard — The BIOS uses the system manufacturer's keys and certicates
to authenticate preboot images.
Custom — The BIOS uses user-dened keys and certicates. Secure Boot
Policy is Standard by default.
Microsoft Windows,
Linux
Secure Guard Extensions
Congures the Software Guard Extensions (SGX) feature. You can select Enabled
or Software Controlled if this option is Disabled.
NOTE: Using Dell Command | Monitor, you cannot do the following:
Disable this feature if the current state is Enabled or Software Controlled
Enable this feature if the current state is Software Controlled
Change this feature to Software Controlled if the current state is Enabled
NOTE: One of the methods of conguring the Software Guard
Extensions (SGX) feature is from the BIOS setup screen.
Microsoft Windows,
Linux
Serial Communications
Sets the Serial Communication.
Possible values are:
O
On without console redirection
On with console redirection (COM1)
On with console redirection (COM2)
On with console redirection
Microsoft Windows
Serial Port 1
Congures the 1st serial port of the system.
Possible values are:
Disable — Disables the 1st serial port.
Auto — Enables the auto-conguration of the 1st serial port.
COM1
COM2
COM3
COM4
BMC Serial
BMC NIC
Microsoft Windows,
Linux
BIOS settings supported in Dell Command | Monitor10.1.0 291