Reference Guide

Property Description
2 .. = User 3
32768..65535 = DMTF Reserved
ColorModePresetCapabilities
This property lists the allowed values for ColorModePreset.
Possible values are:
0 = Unknown
2 = sRGB
3 = Display Native
4 = 4000K
5 = 5000K
6 = 6500K
7 = 7500K
8 = 8200K
9 = 9300K
1011 = 10000K
12 = 11500K
13 = User 1
14 = User
.. = User 3
32768..65535 = DMTF Reserved
CommunicationStatus
Indicates the ability of the instrumentation to communicate with the
underlying ManagedElement. A Null return indicates the
implementation (provider) does not implement this property.
Possible values are:
0 = Unknown — Indicates that the implementation is in general
capable of returning this property, but is unable to do so now.
1 = Not Available — Indicates that the implementation
(provider) is capable of returning a value for this property, but
not ever for this particular piece of hardware/software or the
property is intentionally not used because it adds no meaningful
information (as in the case of a property that is intended to add
additional info to another property).
2 = Communication OK — indicates that communication is
established with the element, but does not convey any quality
of service.
3 = Lost Communication — Indicates that the Managed
Element is known to exist and has been contacted successfully
in the past, but is unreachable.
4 = No Contact — Indicates that the monitoring system has
knowledge of this element, but has never been able to establish
communications with it.
.. = DMTF Reserved
0x8000.. = Vendor Reserved
CompositSyncSignalOnGreenVideoSupported
Composite Sync Signal on Green video is supported.
CompositSyncSignalOnHorizontalSupported
Composite Sync Signal on Horizontal is supported.
ContinuousFrequency
For EDID 1.3, this bit indicated support for or no support for
GTF(using the default GTF parameter values). For EDID 1.4 this bit
has been redened to indicate Continuous frequency(1) or Non-
Continuous Frequency(0).
Dell Command | Monitor10.1.0 classes and properties 27