Reference Guide

BIOS Settings Name Description Supported Operating
System(s)
Possible values are: 0, integers ranging from 1 to 254
NOTE: The system wakes up from Sleep, Hibernate, or Switched o
mode only if the Auto On option is enabled for everyday of the week.
BIOS Auto Recovery
Enables or disables the BIOS auto recovery feature.
Possible values are:
• Enabled — If BIOS corruption is detected, the system automatically recovers
BIOS without any user interaction.
• Disabled — Disables BIOS auto recovery feature.
Microsoft Windows,
Linux
Back Camera
Enables or disables the rearward facing camera.
Possible values are:
• Disable — Disables the rearward facing camera.
• Enable — Enables the rearward facing camera.
Microsoft Windows,
Linux
Battery Slice Charge
Conguration
Congures the battery slice charging
Possible values are:
• 1 - Adaptive
• 2 - Standard
• 3- Express
• 4- PrimAcUse
• 5- Custom
Microsoft Windows,
Linux
BIOS Connect
Enables or disables the BIOS Connect feature.
Possible values are:
• Enable
• Disable
Microsoft Windows,
Linux
BIOS Connect Activation
Congures the state of the available BiosConnect boot paths.
Possible values are:
• 0 — Deactivate — BIOS setup options are not available and all BiosConnect
boot paths are disabled.
• 1 — Full Activation — BIOS Setup options are enabled and all BiosConnect
boot paths are enabled.
• 2 — Launchpad Activation Only — BIOS setup options are enabled and only
launchpad code path is enabled.
Microsoft Windows,
Linux
BIOS Enumeration Mode BIOS Assist Enumeration, Native Enumeration
Possible values are: 0,1
Microsoft Windows,
Linux
Bios Integrity Check
Enables or disables the BIOS integrity check during the booting process.
Possible values are:
• enable — BIOS checks the BIOS image integrity during every booting process.
• disable — BIOS checks the BIOS image integrity only if the previous booting
process did not complete.
NOTE: BIOS checks the BIOS image integrity only if the
biosautorecovery option is enabled.
Microsoft Windows,
Linux
256 BIOS settings supported in Dell Command | Monitor10.1.0