Reference Guide

BIOS settings supported in Dell Command |
Monitor
10.1.0
Following is the list of BIOS settings supported in Dell Command | Monitor.
BIOS Settings Name Description Supported Operating
System(s)
Active State Power
Management
Set the ASPM (Active State Power Management) level.
Possible values are:
• Auto — There is handshaking between the device and PCI Express hub to
determine the best ASPM mode supported by the device.
• Disabled — ASPM power management is turned o always.
• L1 Only — ASPM power management is set to use L1.
Microsoft Windows,
Linux
Activity LED
Sets the Network Activity Light Emitting Diode (LED) to any of the following:
Possible values are:
• 1 = EnableACPIOSControl — Sets the Activity LED controlled by an Advanced
Conguration and Power Interface (ACPI) operating system and driver.
• 2 = WirelessLANIndicator — Sets the Activity LED as a wireless Local Area
Network (LAN) radio on/o indicator.
• 3 = O — Sets the Activity LED to o.
Microsoft Windows,
Linux
AGP Slot
Enables or disables the on-board AGP slot.
Possible values are:
• Disable
• Enable
Microsoft Windows
AC Power Recovery Mode
Sets AC Power Recovery Mode.
Possible values are:
• O
• Last
• On
Microsoft Windows,
Linux
Adjacent Cache Line
Prefetch
If sets to Disable then the CPU will only fetch the cache line that contains the
data currently required by the CPU.
If sets to Enable then it enables the CPU to fetch the adjacent cache line in the
other half of the sector.
Possible values are:
• Disable
• Enable
Microsoft Windows,
Linux
Admin Setup Lockout
If the value of Admin Setup Lockout is Enabled and the Admin Password is set,
users will not be allowed to see any part of the Setup screens unless they enter
Microsoft Windows,
Linux
6
BIOS settings supported in Dell Command | Monitor10.1.0 249