Reference Guide

DCIM_InstalledSoftwareIdentity
Property Description
InstalledSoftware
The SoftwareIdentity that is installed.
System
The system on which the software is installed.
DCIM_ConcreteIdentity
Property Description
SameElement
SameElement Another aspect of the ManagedElement.
SystemElement
One aspect of the ManagedElement. The use of 'System' in the name does not limit the
scope of the association. This name is an artifact of the original denition of the association.
DCIM_SMARTAttributeInfo
Property
Description
AttributeID AttributeID represents the relative reliability of individual performance or
calibration attributes. The valid range of attribute values begins from 1–253
decimal.
AttributeName Name dened for the corresponding AttributeID.
CurrentValue
Current value of an attribute which represents the relative reliability of
individual performance or calibration attributes.
CustomThresholdValue
Each attribute has a corresponding Custom Threshold Value which is
used for direct comparison to the Current Value to indicate the existence
of a degrading or faulty condition. The numerical value of the
Custom
Threshold Value is determined by the IT administrator and set the value
lesser than the Threshold Value set by the Manufacturer. The valid range
for Attribute Thresholds is from 1–253 decimal.
DiskID Disk ID of the HDD/SSD.
FirmwareVersion Firmware Version of the HDD/SSD.
Manufacturer HDD/SSD Manufacturer.
ModelNumber HDD/SSD Model Number.
RawDataContent Raw data content in hexadecimal for the corresponding AttributeID (6
bytes).
SerialNumber HDD/SSD Serial Number.
StatusFlag A 2-byte number which represents the status of the corresponding
AttributeID:
• Bit 0: Prefail/Advisory bit
• Bit 1: Online data collection bit
• Bit 2–5: Vendor-specic
• Bit 6–15: Reserved
Dell Command | Monitor10.1.0 classes and properties 247