Reference Guide

Property Description
RequestedPowerState
The desired or the last requested power state of the associated Managed System Element,
irrespective of the mechanism through which the request was made. If the requested power
state is unknown, then the property has the value of 0 Unknown. If the property has no
meaning or is not supported, then the property has the value 12 Not Applicable.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -_Deep
• 5 = Power Cycle (O - Soft)
• 6 = O - Hard
• 7 = Hibernate (O - Soft)
• 8 = O - Soft
• 9 = Power Cycle (O-Hard)
• 10 = Master Bus Reset
• 11 = Diagnostic Interrupt (NMI)
• 12 = Not Applicable
• 13 = O - Soft Graceful
• 14 = O - Hard Graceful
• 15 = Master Bus Reset Graceful
• 16 = Power Cycle (O - Soft Graceful)
• 17 = Power Cycle (O - Hard Graceful)
• .. = DMTF Reserved
• 0x7FFF..0xFFFF = Vendor Specic
ServiceProvided
The Service that is available.
UserOfService
The ManagedElement that can use the Service.
DCIM_ServiceAvailableToElement
Property
Description
ServiceProvided
The Service that is available.
UserOfService
The ManagedElement that can use the Service.
DCIM_LogManagesRecord
Property
Description
Log
The Log.
Record
The record managed by the Log.
246 Dell Command | Monitor10.1.0 classes and properties