Reference Guide

Property Description
WritePolicy
Denes whether this is write-back (value = 2) or write-through (value = 3) Cache, or
whether this information Varies with Address (4) or is dened individually for each I/O (5).
Also, Other and Unknown (0) can be specied.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Read
• 3 = Read-Ahead
• 4 = Read and Read-Ahead
• 5 = Determination Per I/O
DCIM_AssociatedSensor
Property Description
Antecedent
The Sensor.
Dependent
The ManagedSystemElement for which information is measured by the Sensor.
DCIM_RemoteAccessAvailableToElement
Property
Description
Antecedent
The remote server or system.
Dependent
The EnabledLogicalElement which has knowledge of the remote server or system.
IsDefault
Indicates that this access information is dened as a default conguration for the system.
OrderOfAccess
When an element is accessing remote services and systems, it MAY be necessary to order
those accesses. This property denes that ordering — where lower numbers indicate a
higher priority for access. A value of 0 (default) indicates that ordering does not apply. If
multiple RemoteAccessPoint instances have the same value for OrderOfAccess, then these
AccessPoints MAY be used in any sequence dened by the implementation.
DCIM_ServiceServiceDependency
Property
Description
Antecedent
The required Service
Dependent
The Service that is dependent on an underlying Service.
Dell Command | Monitor10.1.0 classes and properties 239