Reference Guide

Property Description
17 = Disk Drive
18 = Tape Drive
19 = Storage Extent
20 = Other Storage Device
21 = Serial port
22 = Parallel port
23 = USB Controller
24 = Graphics controller
25 = IEEE 1394 Controller
26 = Partitionable Unit
27 = Base Partitionable Unit
28 = Power
29 = Cooling Capacity
30 = Ethernet Switch Port
31 = Logical Disk
32 = Storage Volume
33 = Ethernet Connection
.. = DMTF reserved
0x8000..0xFFFF = Vendor Reserved
SharingMode
Indicates how access to underlying resource is granted.
Possible values are:
0 = Unknown
1 = Other
2 = Dedicated — Exclusive access to underlying resource
3 = Shared — Shared use of underlying resource.
.. = DMTF reserved
0x8000..0xFFFF = Vendor Reserved
Actual quantity is controlled by min, max size, weights, and so on.
DCIM_BIOSServiceCapabilities
Property
Description
InstanceID
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely
identies an instance of this class. In order to ensure uniqueness within the NameSpace, the
value of InstanceID SHOULD be constructed using the following preferred algorithm:
<OrgID> : <LocalID> Where <OrgID>and <LocalID> are separated by a colon ':', and where
<OrgID> MUST include a copyrighted, trademarked or otherwise unique name that is owned
by the business entity creating/dening the InstanceID, or is a registered ID that is assigned
to the business entity by a recognized global authority (This is similar to the <Schema
Name>_<Class Name> structure of Schema class names.) In addition, to ensure uniqueness
<OrgID> MUST NOT contain a colon (':'). When using this algorithm, the rst colon to
appear in InstanceID MUST appear between <OrgID>and <LocalID>. <LocalID> is chosen by
the business entity and SHOULD not be re-used to identify dierent underlying (real-world)
elements. If the above preferred algorithm is not used, the dening entity MUST assure that
the resultant InstanceID is not re-used across any InstanceIDs produced by this or other
providers for this instance's NameSpace. For DMTF dened instances, the preferred
algorithm MUST be used with the <OrgID> set to 'CIM'.
MethodsSupported
This property advertises the methods that are supported by the service .
Dell Command | Monitor10.1.0 classes and properties 219