Reference Guide

Property Description
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not support representing
ongoing transitions.
Version
A string describing the Operating System's version number. The format of the version
information is as follows: <Major Number>.<Minor Number>.<Revision> or <Major
Number>.<Minor Number>.<Revision Letter>.
DCIM_SoftwareIdentity
Property
Description
ClassicationDescriptions
An array of free-form strings providing more detailed explanations for any of the entries in
the Classications array. Note that each entry is related to one in the Classications array
located at the same index.
Classications
An array of enumerated integers that classify this software. For example, the software MAY
be instrumentation (value = 5) or rmware and diagnostic software (10 and 7). The use of
value 6, Firmware/BIOS, is being deprecated. Instead, either the value 10 (Firmware) and/or
11 (BIOS/FCode) SHOULD be used. The value 13, Software Bundle, identies a software
package consisting of multiple discrete software instances that can be installed individually or
together.
Each contained software instance is represented by an instance of SoftwareIdentity that is
associated to this instance of SoftwareIdentityinstance via a Component association.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Driver
• 3 = Conguration Software
• 4 = Application Software
• 5 = Instrumentation
• 6 = Firmware/BIOS
• 7 = Diagnostic Software
• 8 = Operating System
• 9 = Middleware
• 10 = Firmware
• 11 = BIOS/FCode
• 12 = Support/Service Pack
Dell Command | Monitor10.1.0 classes and properties
183