Reference Guide

Property Description
• 109 = Oracle Enterprise Linux 64-bit
• 110 = eComStation 32-bitx
• 111 = Microsoft Windows Server 2011
• 113 = Microsoft Windows Server 2012
• 114 = Microsoft Windows 8
• 115 = Microsoft Windows 8 64-bit
• 116 = Microsoft Windows 8.1
• 117 = Microsoft Windows 8.1 64-bit
• 118 = Microsoft Windows 10
• 119 = Microsoft Windows 10 64-bit
RequestedState
An integer enumeration that indicates the last requested or desired state for the element,
irrespective of the mechanism through which it was requested.
Possible values are:
• 0 = Unknown — Indicates the last requested state for the element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Oine — Indicates that the element has been requested to transition to the
Enabled but Oine EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down and then moving to an Enabled state.
• 11 = Reset - Indicates that the element is rst Disabled and then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
The actual state of the element is represented by EnabledState. This property is provided to
compare the last requested and current enabled or disabled states. Note that when
EnabledState is set to 5 (Not Applicable), then this property has no meaning. Refer to the
EnabledState property description for explanations of the values in the RequestedState
enumeration.
NOTE
: The value No Change (5) has been deprecated instead of indicating the
last requested state is Unknown (0). If the last requested or desired state is
unknown, RequestedState should have the value Unknown (0), but may have the
value No Change (5).
There are two new values in RequestedState that build on the statuses of EnabledState.
These are Reboot (10) and Reset (11).
Shut Down requests an orderly transition to the Disabled state, and may involve removing
power, to completely erase any existing state. The Disabled state requests an immediate
disabling of the element, such that it will not execute or accept any commands or
processing requests.
This property is set as the result of a method invocation (such as Start or StopService on
CIM_Service), or can be overridden and dened as WRITEable in a subclass. The method
approach is considered superior to a WRITEable property, because it allows an explicit
invocation of the operation and the return of a result code.
If knowledge of the last RequestedState is not supported for the EnabledLogicalElement,
the property is NULL or has the value 12 (Not Applicable).
182
Dell Command | Monitor10.1.0 classes and properties