Reference Guide

Property Description
If knowledge of the last RequestedState is not supported for the EnabledLogicalElement,
the property is NULL or has the value 12 Not Applicable.
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning.
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identies the state to which the element is in the process of
transitioning.
SetBIOSAttributes (Method)
This method is called to modify a group of BIOSAttribute instances associated with this
BIOSService. The method may return the following errors:
• 0 (Success) — If the method is completed successfully.
• 1 (Failure) — If
– the possible value is out of range. For example, trying to set value other than 0 to 23
for the attribute Autoon Hour.
– it is an unsupported BIOS operation. For example, trying to enable TPM when TPM
is disabled.
• 2 (Authentication failure) — If the BIOS password is incorrect.
• 4294967295 (Invalid Possible Value) — If the possible value is invalid; or read-only.
The method may return an instance of CIM_Error.
RemoteBIOSUpdate (Method)
This method is called to remotely update the BIOS image. It takes the hdr le of the BIOS
image as the only parameter.
DCIM_SoftwareInstallationService
Property
Description
CreationClassName
Indicates the name of the class or the subclass that is used in the creation of an instance.
When used with the other key properties of this class, this property allows all instances of
this class and its subclasses to be uniquely identied.
EnabledDefault
An enumerated value indicating an administrator's default or startup conguration for the
Enabled State of an element.
Possible values are:
• 2 = Enabled
166 Dell Command | Monitor10.1.0 classes and properties