Reference Guide

Property Description
• 6 = OS Specic — Indicates that the service is employing a power utilization dened by
the operating system. If the property value is 6 (OS Specic), then the
PowerUtilizationMode is equal to 3 (Dynamic).
• 7 = Active Power Utilization — Indicates that the service is employing a specic
algorithm to yield the best power conumption and performance for the aected
managed elements. If the property value is 7 (Active Power Utilization), then the
PowerUtilizationMode is equal to 3 (Dynamic).
PowerUtilizationAlgorithm
Describes the algorithm employed by the service for power utilization. Depending on the
performance and power needs of the managed element, the selection could be made for the
appropriate algorithm to be deployed for the power utilization.
Possible values are:
• 0 = Unknown(Dynamic).
• 2 = None — Indicates that currently the service is not employing any power utilization
algorithm. If the property value is 2 (None), then the PowerUtilizationMode is equal to 2
(None).
• 3 = Custom Settings Based — Indicates that the service is employing power utilzation
algorithm based on a specic settings. This settings may be represented by the
DCIM_PowerUtilizationSettingData instance associated
• 4 = Maximum Performance — Indicates that the service is employing a power utilization
that yields the maximum performance for the aected managed elements. If the
property value is 4 (Maximum Performance), then the PowerUtilizationMode is equal to
4 (Static).
• 5 = Minimum Performance — Indicates that the service is employing a power utilization
that yields the minimum power consumption for the aected managed elements. If the
property value is 5 (Minimum Performance), then the PowerUtilizationMode is equal to
4 (Static).
• 6 = OS Specic — Indicates that the service is employing a power utilization dened by
the operating system. If the property value is 6 (OS Specic), then the
PowerUtilizationMode is equal to 3 (Dynamic).
• 7 = Active Power Utilization — Indicates that the service is employing a specic
algorithm to yield the best power conumption and performance for the aected
managed elements. If the property value is 7 (Active Power Utilization), then the
PowerUtilizationMode is equal to 3
PowerUtilizationMode
Indicates the current power utilization mode implemented by the service. The mode
selection is a generally made infrequently as part of element conguration.
Possible values are:
• 0 = Unknown — Indicates the last requested state for the element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Oine — Indicates that the element has been requested to transition to the
Enabled but Oine EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down and then moving to an Enabled state.
• 11 = Reset — Indicates that the element is rst Disabled and then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
RequestedState
An integer enumeration that indicates the last requested or desired state for the element,
irrespective of the mechanism through which it was requested. The actual state of the
162 Dell Command | Monitor10.1.0 classes and properties