Reference Guide

Property Description
• 4 = Shutting Down — Indicates that the element is in the process of going to a Disabled
state.
• 5 = Not Applicable — Indicates the element does not support being enabled or disabled.
• 6 = Enabled but Oine — Indicates that the element may be completing commands,
and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing commands, but will
queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
• 10 = Starting — Indicates that the element is in the process of going to an Enabled
state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
Name
The Name property uniquely identies the Service and provides an indication of the
functionality that is managed. This functionality is described in more detail in the Description
property of the object.
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identies the state to which the element is in the process of
transitioning.
DCIM_PowerUtilizationManagementService
Property
Description
CreationClassName
Indicates the name of the class or the subclass that is used in the creation of an instance.
When used with the other key properties of this class, this property allows all instances of
this class and its subclasses to be uniquely identied.
EnabledDefault
An enumerated value indicating an administrator's default or startup conguration for the
Enabled State of an element. By default, the element is Enabled (value = 2).
160 Dell Command | Monitor10.1.0 classes and properties