Reference Guide

Property Description
• 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
• 10 = Starting — Indicates that the element is in the process of going to an Enabled
state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
Name
The Name property uniquely identies the Service and provides an indication of the
functionality that is managed. This functionality is described in more detail in the Description
property of the object.
OtherEnabledState
A string that describes the enabled or disabled state of the element when the EnabledState
property is set to 1 (Other). This property must be set to null when EnabledState is any
value other than 1.
PrimaryOwnerContact
A string that provides information on how the primary owner of the Service can be reached
(for example, phone number, e-mail address and so on).
PrimaryOwnerName
The name of the primary owner for the service, if one is dened. The primary owner is the
initial support contact for the Service.
PrimaryStatus
Provides a high-level status value, intended to align with Red-Yellow-Green type
representation of status. It should be used with DetailedStatus to provide high level and
detailed health status of the ManagedElement and its subcomponents.
Possible values are:
• 0 = Unknown — Indicates that the implementation is in general capable of returning this
property, but is unable to do so now.
• 1 = OK — Indicates the ManagedElement is functioning normally.
• 2 = Degraded — Indicates the ManagedElement is functioning below normal.
• 3 = Error — Indicates the ManagedElement is in an Error condition.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
RequestedState
An integer enumeration that indicates the last requested or desired state for the element,
irrespective of the mechanism through which it was requested. The actual state of the
element is represented by EnabledState. This property is provided to compare the last
requested and current enabled or disabled states.
Possible values are:
• 0 = Unknown — Indicates that the last requested state for the element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Oine — Indicates that the element has been requested to transition to the
Enabled but Oine EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down and then moving to an Enabled state.
• 11 = Reset — Indicates that the element is rst Disabled and then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
Dell Command | Monitor10.1.0 classes and properties 155