Reference Guide

Property Description Supported Operating
System(s)
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Adapter/Card Error
• 3 = Application Subsystem Failure
• 4 = Bandwidth Reduced
• 5 = Connection Establishment Error
• 6 = Communications Protocol Error
• 7 = Communications Subsystem Failure
• 8 = Conguration/Customization Error
• 9 = Congestion
• 10 = Corrupt Data
• 11 = CPU Cycles Limit Exceeded
• 12 = Dataset/Modem Error
• 13 = Degraded Signal
• 14 = DTE-DCE Interface Error
• 15 = Enclosure Door Open
• 16 = Equipment Malfunction
• 17 = Excessive Vibration
• 18 = File Format Error
• 19 = Fire Detected
• 20 = Flood Detected
• 21 = Framing Error
• 22 = HVAC Problem
• 23 = Humidity Unacceptable
• 24 = I/O Device Error
• 25 = Input Device Error
• 26 = LAN Error
• 27 = Non-Toxic Leak Detected
• 28 = Local Node Transmission Error
• 29 = Loss of Frame
• 30 = Loss of Signal
• 31 = Material Supply Exhausted
• 32 = Multiplexer Problem
• 33 = Out of Memory
• 34 = Output Device Error
• 35 = Performance Degraded
• 36 = Power Problem
• 37 = Pressure Unacceptable
• 38 = Processor Problem (Internal Machine Error)
• 39 = Pump Failure
• 40 = Queue Size Exceeded
• 41 = Receive Failure
• 42 = Receiver Failure
• 43 = Remote Node Transmission Error
• 44 = Resource at or Nearing Capacity
• 45 = Response Time Excessive
• 46 = Retransmission Rate Excessive
• 47 = Software Error
• 48 = Software Program Abnormally Terminated
Dell Command | Monitor10.1.0 classes and properties
15