Reference Guide

Property Description
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identies the state to which the element is in the process of
transitioning.
DCIM_LCDPanel
Property Description
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When
used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identied.
DeviceID
An address or other identifying information used to uniquely name the LogicalDevice.
DisplayDataCategory
Identies the category of data to be displayed on the LCD Panel.
Possible values are:
• 2 = None
• 3 = User Specied
• 4 = Default
• 5 = IPv4 Address
• 6 = IDRAC MAC Address
• 7 = Service Tag
• 8 = System Name
• 9 = IPv6 Address
• 10 = Ambient
• 11 = System Power
DisplayModeUserString
Contains a user congurable string to be displayed on the LCD panel if DisplayDataCategory
has the value 3.
EnabledDefault
An enumerated value indicating an administrator's default or startup conguration for the
Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Oine
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
Dell Command | Monitor10.1.0 classes and properties 143