Reference Guide

Property Description
• 23 = Socket AM2
• 24 = Socket F (1207)
• 25 = Socket LGA1366
• 26 = Socket G34
• 27 = Socket AM3
• 28 = Socket C32
• 29 = Socket LGA1156
• 30 = Socket LGA1567
• 31 = Socket PGA988A
• 32 = Socket BGA1288
• 33 = rPGA988B
• 34 = BGA1023
• 35 = BGA1224
• 36 = LGA1155
• 37 = LGA1356
• 38 = LGA2011
• 39 = Socket FS1
• 40 = Socket FS2
• 41 = Socket FM1
• 42 = Socket FM2
• 43 = Socket LGA2011–3
• 44 = Socket LGA1356–3
• 45 = Socket LGA1150
• 46 = Socket BGA1168
DCIM_NumericSensor
Property
Description Supported
Operating
System(s)
BaseUnits
The base unit of the values returned by this Sensor. All the values returned by this Sensor
are represented in the units obtained by (BaseUnits * 10 raised to the power of the
UnitModier). For example, if BaseUnits is Volts and the UnitModier is -6, then the units
of the values returned are MicroVolts. However, if the RateUnits property is set to a value
other than None, then the units are further qualied as rate units. In the above example, if
RateUnits is set to Per Second, then the values returned by the Sensor are in MicroVolts/
Second. The units apply to all numeric properties of the Sensor, unless explicitly overridden
by the Units qualier.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Degrees C
• 3 = Degrees F
• 4 = Degrees K
• 5 = Volts
• 6 = Amps
• 7 = Watts
• 8 = Joules
• 9 = Coulombs
• 10 = VA
Microsoft
Windows, Linux
Dell Command | Monitor10.1.0 classes and properties 121