Reference Guide

Property Description
• 13 = Overcharged
Values such as Fully Charged (value = 3) or Partially Charged (value = 11) can be specied.
The value, 10, is not valid in the CIM Schema because in DMI it represents that no battery is
installed. In this case, this object should not be instantiated.
ChargingStatus
This property denes status information about the AC line in the notebook.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = O- Line
• 4 = On-Line
• 5 = On Backup Power
Chemistry
An enumeration that describes the chemistry of the Battery.
• 1 = Other
• 2 = Unknown
• 3 = Lead Acid
• 4 = Nickel Cadmium
• 5 = Nickel Metal Hydride
• 6 = Lithium-ion
• 7 = Zinc air
• 8 = Lithium Polymer
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When
used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identied.
DesignCapacity
The design capacity of the battery in m Watt-hours. If this property is not supported, enter
0.
DesignVoltage
The design voltage of the battery in mVolts. If this attribute is not supported, enter 0.
DeviceID
An address or other identifying information used to uniquely name the LogicalDevice.
ElementName
A user-friendly name for the object. This property allows each instance to dene a user-
friendly name in addition to its key properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is also dened as a user-
friendly name. But, it is often subclassed to be a Key. It is not reasonable that the
same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in both the Name and
ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup conguration for the
Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Oine
• 7 = No Default
• 9 = Quiesce
Dell Command | Monitor10.1.0 classes and properties 107