Reference Guide

Property Description
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identies the state to which the element is in the process of
transitioning.
TypeOfRangeSwitching
Describes the kind of input voltage range switching that is implemented in this PowerSupply.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = Manual
• 4 = Autoswitch
• 5 = Wide Range
• 6 = Not Applicable
A value other than 5 or 12 identies the state to which the element is in the process of
transitioning.
DCIM_Battery
Property
Description
BatteryStatus
Description of the charge status of the Battery.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = Fully Charged
• 4 = Low
• 5 = Critical
• 6 = Charging
• 7 = Charging and High
• 8 = Charging and Low
• 9 = Charging and Critical
• 10 = Undened
• 11 = Partially Charged
• 12 = Learning
106 Dell Command | Monitor10.1.0 classes and properties