Install Guide

Installing Dell Command | Monitor on Dell Edge Gateway 5000
or 3000 series systems running Ubuntu Core 15.04 using Snap
package - from Dell Canonical store
To install Dell Command | Monitor on Dell Edge Gateway 5000/3000 series systems running Ubuntu Core 15.04 from the Dell Canonical
store using snap package.
1 Log into the Gateway system.
Default username/password: ubuntu /ubuntu
2 Run the following command:
snappy install <your package name>.snap
Installing Dell Command | Monitor on Dell Edge Gateway 5000
or 3000 series - from a local directory
To install Dell Command | Monitor on Dell Edge Gateway 5000/3000 series systems running Ubuntu Core 15.04 from a local directory,
1 Log in to the Gateway system.
Default username/password: admin/admin
2 Copy the .snap package to a local directory (example, via SCP, USB etc.).
3 Run the following command:
snappy install ./<your app name>.snap
Other commands associated with download and installation
The following commands are associated with download and installation of Dell Command | Monitor on Dell Edge Gateway systems. Run the
following commands to fetch the required information.
Table 2. List of commands
Commands Description
snappy search dcm
Search for and nd Dell Command | Monitor application currently available for your
system.
snappy info
Check the Ubuntu Core version.
snappy list
View the list of applications installed on your system, and verify if Dell Command |
Monitor is available. The following details are displayed: name of the application,
installation date, version, and developer.
snappy service status
Verify if Dell Command | Monitor service is running on your system.
16 Installing Dell Command | Monitor10.1.0 on systems running Linux