Users Guide

Retrieving Wipe Client Data Status
NOTE
:
Retrieve
requests the status of the Wipe Client Data operation.
NOTE
: After the remote hard drive wipe command has been issued from the server to the client system, the task’s status
changes to Complete. The format process on the client system will begin only after the status changes to Complete.
To retrieve the status:
1 Select Retrieve and click
Next.
The Select Clients tab is displayed.
2 Search for client systems to which you want to retrieve the status of Wipe Client Data.
3 From the
Available clients list select the client systems you want to manage and click the
button to move your selected systems or
pr
ess the
button to move all the discovered Dell clients into the Selected clients list.
4 Click Next.
5 The Schedule Task tab is displayed.
6 You can either choose to apply the task immediately or schedule it to run later. Depending on your schedule, select one of the following
options:
• Run now — the status of Wipe Client Data operations is immediately retrieved and displays the Running status in the Task Queue.
NOTE: If your client systems are not connected to the network, run the task again.
• Run At — the status is queued in the Task Queue.
NOTE: You can launch the Task Queue to view the list of completed and pending tasks.
7 Provide a brief description of the changes you are applying and click Next.
The Summary tab is displayed.
8 Click
Finish.
Generating Reports
This feature allows you to generate and view detailed reports on Out-Of-Band Manageability, Provisioning, Battery Health of laptop client-
s
ystems, and Hardware Inventory reports for single or multiple-client systems. These reports can be exported as a spreadsheet.
1 Launch Dell Command | Intel vPro Out of Band.
For more information, see Launching Dell Command | Intel vPro Out of Band.
2 On the
Home screen, click Reports.
3 On the
Welcome screen you can generate the following reports:
• Out Of Band Manageability — you can see the AMT Management Engine con
guration for client systems.
• Provisioning
— view the provisioning status of all the client systems in the network.
• Battery Health — view the battery health of all the AMT enabled client systems on the network.
• Hardware Inventory — collect the inventory information of all the client systems on the network.
4 After selecting the type of report you want, you can perform one of the following actions:
• Schedule
— for more information, see
Scheduling Reports.
• Retrieve
— for more information, see
Retrieving Reports.
Scheduling Reports
Generate reports for selected client systems on the network. To schedule a report:
1 Click Schedule.
The Select Clients tab is displayed.
2 Search for the list of client systems you want to view the reports on.
Using Dell Command | Intel vPro Out of Band 25