Users Guide

NOTE
: If the Dell client systems are not connected to the network, run the task again.
• Run At
— the BIOS password conguration is queued in the Task Queue.
NOTE
: You can launch the Task Queue to view the list of completed and pending tasks.
11 Provide a brief description of the changes you are applying and click Next
.
The Summary tab is displayed.
12 Click
Finish.
The Task Queue window is opened and depending on how you scheduled the task, it starts running immediately or will be queued.
Operations
This feature allows you to set up KVM sessions, turn o
, turn on, and reboot Dell client systems, and remote wipe the hard drives of Dell
client systems.
Establishing KVM Sessions
This feature allows you to remotely view the primary or secondary (if present) monitors of your client systems with an Intel Graphics card.
F
or more information, see your client systems documentation on dell.com/support/manuals.
NOTE
: Before a remote KVM session can be established, enable KVM through the Intel Management Engine BIOS Extension
(MEBx) interface.
NOTE
: After a period of inactivity if the KVM session times out, re-established the session. To specify the time-out period, see
KVM
To establish KVM sessions with remote client systems:
1 Launch Dell Command | Intel vPro Out of Band.
For more information, see Launching Dell Command | Intel vPro Out of Band.
2 Click Operations > KVM Connect.
The KVM Connect
tab is displayed.
3 Search for the list of client systems on which you want to establish KVM sessions.
4 Select a client system on which you want to start the KVM session and click Connect.
Performing Power Management
This feature allows you to gracefully shut down or restart your client system, through the Windows operating system enabled by the AMT
oper
ation.
NOTE: Windows r
ewall can block graceful power request by Dell Command | Intel vPro Out of Band.
1 Launch Dell Command | Intel vPro Out of Band.
For more information, see Launching Dell Command | Intel vPro Out of Band.
2 Click Operations > Power Management.
The Power Management
tab is displayed.
3 Select the power control option you want to run on the client-systems from the drop-down list.
4 Click
Next.
The
Select Clients tab is displayed.
5 Search for client system you want to apply the Power Management changes.
6 From the
Discovered clients list select the client systems you want to manage and click the
button to move your selected systems
or pr
ess the
button to move all the discovered Dell clients into the Selected clients list.
7 Click
Next.
The Schedule Task
tab is displayed.
Using Dell Command | Intel vPro Out of Band 23