Users Guide
Table Of Contents
- Dell Command | Integration Suite for System Center Version 5.0 User’s Guide
- Introduction
- Using Dell Command | Integration Suite for System Center
- The Dell Command | Intel vPro Out Of Band Application
- Software Prerequisites
- Configuring WinRM on Client Systems
- Launching The Dell Command | Intel vPro Out of Band Application
- Account Setup
- Client Discovery
- Settings
- Remote Provisioning
- USB Provisioning
- Indications
- Client Configuration
- Operations
- Generating Reports
- Task Queue
- Troubleshooting
- Related Reference
Max Password Length Change
Some system BIOS does not support reducing the Maximum password length down from 32.
KVM Power Control to Boot to OS in S3
If after a KVM connection is established, the AMT client enters power state S3 or S4, the KVM connection is lost within
30 seconds of entering the sleep state. (This issue occurs in both wired and wireless environments.) In such a case, the
administrator needs to restart the connection (Connection→ Start), before issuing a reboot command (OS, BIOS, Diagnostics,
IDE-R).
Apply Operating System Task Sequence Action Has A
Red Bang
When creating a new Task Sequence using the Bare Metal Client Deployment Template the Apply Operating System Task
Sequence action has a Red Bang. To resolve this:
1. In the Task Sequence editor, click Apply Operating System Image.
2. Select an operating system image by:
● Selecting Apply operating system from a capture image option.
● Selecting Apply operating system from an original installation source option.
3. Click Browse.
4. Browse and select the Operating System Image and click OK.
5. Deselect the Use an unattended or Sysprep answer file for a custom installation option.
6. Click the Options tab.
7. Select Disable this step option.
8. Click Apply.
9. Click the Options tab.
10. Deselect the Disable this step option.
11. Click Apply.
Troubleshooting
35