Users Guide

1. Launch the Dell Command | Intel vPro Out of Band application.
2. Click Client Configuration > BIOS Passwords.
The BIOS Passwords tab is displayed.
3. Select one of the following options:
● Clear — clear either the Admin or System password.
NOTE: Clear the System password before clearing the Admin password
● Set — enter and confirm the Admin or System password.
NOTE: Client systems have to reboot after setting the Admin or System passwords.
● Length — you can specify the minimum and maximum length for the Admin and System password.
4. If you want the Task execution to continue to subsequent clients systems when an error occurs, select the Continue on
error option. Otherwise, Task execution stops on the first client system where an error is encountered
5. If you want to reboot after applying changes select the Reboot after applying changes option.
6. Click Next.
The Select Clients tab is displayed.
7. Search for client systems to which you want to apply the Boot Order changes to.
8. From the Available clients list select the client systems you want to manage and click the
button to move your selected
systems or press the button to move all the discovered Dell clients into the Selected clients list.
9. Click Next.
The Schedule Task tab is displayed.
10. You can either choose to apply the password changes immediately or schedule it to run later.
Depending on the schedule, select one of the following options:
● Run now — the BIOS password configuration is immediately applied and displays the Running status in the Task
Queue.
NOTE: If the Dell client systems are not connected to the network, run the task again.
● Run At — the BIOS password configuration is queued in the Task Queue.
NOTE: You can launch the Task Queue to view the list of completed and pending tasks.
11. Provide a brief description of the changes you are applying and click Next.
The Summary tab is displayed.
12. Click Finish.
The Task Queue window is opened and depending on how you scheduled the task, it starts running immediately or will be
queued.
Operations
This feature allows you to set up KVM sessions, turn off, turn on, and reboot Dell client systems, and remote wipe the hard
drives of Dell client systems.
Establishing KVM Sessions
This feature allows you to remotely view the primary or secondary (if present) monitors of your client systems with an Intel
Graphics card. For more information, see your client systems documentation on dell.com/support/manuals.
NOTE:
Before a remote KVM session can be established, enable KVM through the Intel Management Engine BIOS
Extension (MEBx) interface.
NOTE: After a period of inactivity if the KVM session times out, re-establish the KVM session. To specify the time-out
period, see KVM
To establish KVM sessions with remote client systems with Intel graphics card:
1. Launch the Dell Command | Intel vPro Out of Band application.
2. Click Operations > KVM Connect.
The KVM Connect tab is displayed.
3. Search for the list of client systems on which you want to establish KVM sessions.
4. Select a client system on which you want to start the KVM session and click Connect.
The Dell Command | Intel vPro Out Of Band Application
29