Users Guide

Start. Also note that when control of the wireless link is automatically reverted as a result of the Link Preference Timeout expiring, there

is no loss of connectivity. There are individual timeout values for each shutdown/reboot operation (defined in KVM View app.config

settings) that can be configured externally:

• LPTImeoutRebootToOS

• LPTimeoutRebootToBIOS

• LPTimeoutRebootToDiagnostics

• LPTimeoutRebootWithIDER

• LPTimeoutShutdown

For more information, see http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide/

DOCS/Implementation%20and%20Reference%20Guide/default.htm.

Hardware Inventory Report Memory Speed is

reported as Zero

This is a DMTF issue where memory speed is defined in seconds. Configuration Manager Resource Explorer today reports this as 0.

Max Password Length Change

Some system BIOS does not support reducing the Maximum password length down from 32.

KVM Power Control to Boot to OS in S3

If after a KVM connection is established, the AMT client enters power state S3 or S4, the KVM connection is lost within 30 seconds of

entering the sleep state. (This issue occurs in both wired and wireless environments.) In such a case, the administrator needs to restart

the connection (Connection→ Start), before issuing a reboot command (OS, BIOS, Diagnostics, IDE-R).

Apply Operating System Task Sequence Action

Has A Red Bang

When creating a new Task Sequence using the Bare Metal Client Deployment Template the Apply Operating System Task Sequence

action has a Red Bang. To resolve this:

1. In the Task Sequence editor, click Apply Operating System Image.

2. Select an operating system image by:

• Selecting Apply operating system from a capture image option.

• Selecting Apply operating system from an original installation source option.

3. Click Browse.

4. Browse and select the Operating System Image and click OK.

5. Deselect the Use an unattended or Sysprep answer file for a custom installation option.

6. Click the Options tab.

7. Select Disable this step option.

8. Click Apply.

9. Click the Options tab.

10. Deselect the Disable this step option.

11. Click Apply.

Troubleshooting