Users Guide

7. Search for client systems to which you want to apply the Boot Order changes to.
8. From the Available clients list select the client systems you want to manage and click the button to move your selected systems or
press the button to move all the discovered Dell clients into the Selected clients list.
9. Click Next.
The Schedule Task tab is displayed.
10. You can either choose to apply the password changes immediately or schedule it to run later.
Depending on the schedule, select one of the following options:
• Run now — the BIOS password configuration is immediately applied and displays the Running status in the Task Queue.
NOTE: If the Dell client systems are not connected to the network, run the task again.
• Run At — the BIOS password configuration is queued in the Task Queue.
NOTE: You can launch the Task Queue to view the list of completed and pending tasks.
11. Provide a brief description of the changes you are applying and click Next.
The Summary tab is displayed.
12. Click Finish.
The Task Queue window is opened and depending on how you scheduled the task, it starts running immediately or will be queued.
Operations
This feature allows you to set up KVM sessions, turn off, turn on, and reboot Dell client systems, and remote wipe the hard drives of Dell
client systems.
Establishing KVM Sessions
This feature allows you to remotely view the primary or secondary (if present) monitors of your client systems with an Intel Graphics card.
For more information, see your client systems documentation on dell.com/support/manuals.
NOTE:
Before a remote KVM session can be established, enable KVM through the Intel Management Engine BIOS
Extension (MEBx) interface.
NOTE: After a period of inactivity if the KVM session times out, re-establish the KVM session. To specify the time-out
period, see KVM
To establish KVM sessions with remote client systems with Intel graphics card:
1. Launch the Dell Command | Intel vPro Out of Band application.
2. Click Operations > KVM Connect.
The KVM Connect tab is displayed.
3. Search for the list of client systems on which you want to establish KVM sessions.
4. Select a client system on which you want to start the KVM session and click Connect.
Performing Power Management
This feature allows you to gracefully shut down or restart your client system, through the Windows operating system enabled by the AMT
operation.
NOTE:
Windows firewall can block graceful power request by Dell Command | Integration Suite for System Center.
1. Launch the Dell Command | Intel vPro Out of Band application.
2. Click Operations > Power Management.
The Power Management tab is displayed.
3. Select the power control option you want to run on the client-systems from the drop-down list.
4. Click Next.
The Select Clients tab is displayed.
5. Search for client system you want to apply the Power Management changes.
6. From the Available clients list select the client systems you want to manage and click the button to move your selected systems or
press the button to move all the discovered Dell clients into the Selected clients list.
7. Click Next.
The Schedule Task tab is displayed.
The Dell Command | Intel vPro Out Of Band Application
33