Users Guide

KVM Power Control to Boot to OS in S3
If after a KVM connection is established, the AMT client enters power state S3 or S4, the KVM connection is lost within 30 seconds of
entering the sleep state. (This issue occurs in both wired and wireless environments.) In such a case, the administrator needs to restart
the connection (Connection→ Start), before issuing a reboot command (OS, BIOS, Diagnostics, IDE-R).
Apply Operating System Task Sequence Action
Has A Red Bang
When creating a new Task Sequence using the Bare Metal Client Deployment Template the Apply Operating System Task Sequence
action has a Red Bang. To resolve this:
1. In the Task Sequence editor, click Apply Operating System Image.
2. Select an operating system image by:
• Selecting Apply operating system from a capture image option.
• Selecting Apply operating system from an original installation source option.
3. Click Browse.
4. Browse and select the Operating System Image and click OK.
5. Deselect the Use an unattended or Sysprep answer file for a custom installation option.
6. Click the Options tab.
7. Select Disable this step option.
8. Click Apply.
9. Click the Options tab.
10. Deselect the Disable this step option.
11. Click Apply.
34
Troubleshooting