Users Guide

3. Under USB Key click Browse and point to the location of the USB storage device.
4. Select the file format for your USB storage device.
5. Select the Enable remote configuration of user consent policy option if you want to allow the
administrator to override the client system's user consent policy.
6. Select the type of Hash Algorithm required for your out-of-band management environment.
7. Select the OOB Provisioning (enabling will start hello packets immediately) option if you want to
send hello packets immediately.
8. Select the Consumable Records option to record the systems that are provisioned.
9. Browse and select the Certificate File you want to apply on your client systems for AMT provisioning.
10. Enter a name for the certificate file.
11. Click Create Key.
The USB provision key is created.
12. Click Export....
The USB provisioning key is exported to the USB storage device.
Indications
Dell Command | Intel vPro Out Of Band provides an indications feature that allows you remotely to
monitor, diagnose, and manage clients using Distributed Management Task Force (DMTF) filters
(indications) to monitor each client.
NOTE: More information on DMTF filters may be found at the DMTF website,www.dmtf.org.
Indications allow you to monitor diagnostic events such as:
• Motherboard failure
• CPU failure
• Power supply failure
• Memory subsystem failure
The indications feature has the following functionality:
• Settings — Set up configuration data for the feature
• Policies — Associate filters with a policy that can be applied to one or more clients
• Configure Subscriptions — Associate policies with clients on the network, and then apply the policies
to the clients
• Subscription status — View and manage subscriptions
• Events — View, manage, and export events
Recommended And Optional Filters
Some indications are message intensive: when applied to a client, these filters will likely generate a large
volume of messages, and they should therefore be used with extreme caution. To avoid network
congestion, only one Optional filter may be applied to a single client on the network at a time. Supported
filters are:
Recommended Filters
21