Setup Guide

For more information, see http://software.intel.com/sites/manageability/
AMT_Implementation_and_Reference_Guide/DOCS/Implementation%20and%20Reference
%20Guide/default.htm.
Hardware Inventory Report Memory Speed is reported as
Zero
This is a DMTF issue where memory speed is defined in seconds. Configuration Manager Resource
Explorer today reports this as 0.
Max Password Length Change
Some system BIOS does not support reducing the Maximum password length down from 32. This is
known issue being worked on at the time of release of the product.
KVM Power Control to Boot to OS in S3
If after a KVM connection is established, the AMT client enters power state S3 or S4, the KVM connection
is lost within 30 seconds of entering the sleep state. (This issue occurs in both wired and wireless
environments.) In such a case, the administrator needs to restart the connection (Connection Start),
before issuing a reboot command (OS, BIOS, Diagnostics, IDE-R).
Windows XP(x86) OS Deployment Hangs During
Installation
Microsoft Windows XP(x86) operating system deployment hangs while installing drivers that use Kernel
Mode Driver Framework (KMDF) version 1.9, such as, Accelerometer device from ST Micro. To resolve this
issue, follow the steps mentioned in support.microsoft.com/kb/2494168/.
Apply Operating System Task Sequence Action Has A Red
Bang
When creating a new Task Sequence using the Bare Metal Client Deployment Template the Apply
Operating System Task Sequence action has a Red Bang. To resolve this:
1. In the Task Sequence editor, click Apply Operating System Image.
2. Select an operating system image by:
Selecting Apply operating system from a capture image option.
Selecting Apply operating system from an original installation source option.
3. Click Browse.
4. Browse and select the Operating System Image and click OK.
5. Deselect the Use an unattended or Sysprep answer file for a custom installation option.
6. Click the Options tab.
7. Select Disable this step option.
8. Click Apply.
9. Click the Options tab.
28