Reference Guide

--PasswordBypass
Table 307. --PasswordBypass
Attribute Details Description
Valid Argument Disabled, RebootBypass, ResumeBypass, RebootAndResumeBypass
Sets the password bypass feature.
--PasswordConfiguration
Table 308. --PasswordConfiguration
Attribute Details Description
Valid Argument
This feature displays and configures the password rules those are applicable to set SysPwd,
SetupPwd, OwnerPwd, and HddPwd.
Suboptions are:
● PwdMinLen—This feature controls the minimum number of characters that are mandatory
for a password. Example: cctk PasswordConfiguration --PwdMinLen=8
● PwdLowerCaseRqd—When enabled, this feature reinforces that the password must
contain one lower case letter. Example: cctk PasswordConfiguration --
PwdLowerCaseRqd=Enabled
● PwdUpperCaseRqd—When enabled, this feature reinforces that the password must
contain one upper case letter. Example: cctk PasswordConfiguration --
PwdUpperCaseRqd=Enabled
● PwdDigitRqd—When enabled, this feature reinforces that the password must contain
one-digit number. Example: cctk PasswordConfiguration --
PwdDigitRqd=Enabled
● PwdSpecialCharRqd—When enabled, this feature reinforces password must contain one
special character. Example: cctk PasswordConfiguration --
PwdSpecialCharRqd=Enabled
NOTE: If the criteria PwdMinLen >=8, PwdLowerCaseRqd=Enabled, and
PwdUpperCaseRqd=Enabled is followed, then StrongPassword is Enabled. If this
criteria is not followed, then StrongPassword is Disabled. Vice-versa is also applicable.
--PcCard
Table 309. --PcCard
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the PC card.
--PcCardAnd1394
Table 310. --PcCardAnd1394
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the PC card and 1394 devices.
Options for Dell Command | Configure 4.3 91