Reference Guide

Table 248. --LiquidCooler2 (continued)
Attribute Details Description
Enables or disables the liquid cooler 2.
● Enabled — Enables the liquid cooler 2.
● Disabled — Disables the liquid cooler 2.
--LiquidCooler1
Table 249. --LiquidCooler1
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the liquid cooler 1.
● Enabled — Enables the liquid cooler 1.
● Disabled — Disables the liquid cooler 1.
--LogicProc
Table 250. --LogicProc
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables hyper threading on the next system boot. On some Dell platforms that
support multi-core processor technology, this is enabled or disabled though the platform does
not support hyper threading. In this case, this command may enable or disable multi-core
processor technology.
--Lpt
Table 251. --Lpt
Attribute Details Description
Valid Argument Lpt1, Lpt2, Lpt3
Defines the parallel port configuration. Lpt1 enables the built-in parallel port of the system to
operate in Lpt1 mode, using Input/Output (I/O) address 378. Lpt2 enables the system’s built-in
parallel port to operate in Lpt2 mode, using I/O address 278. Lpt3 enables the built-in parallel
port to operate in Lpt3 mode, using I/O address 3BC.
--LptMode
Table 252. --LptMode
Attribute Details Description
Valid Argument Disabled, At, Ps2, Ecp, Epp, EcpDma1, EcpDma3
Determines how the parallel ports operate. Set the parallel port to:
● Disabled — Disables the built-in parallel port of the system.
● At — Enables the built-in parallel port of the system to operate in AT mode (output-only).
● Ps2 — Enables the built-in parallel port of the system to operate in PS/2 mode (bi-
directional).
Options for Dell Command | Configure 4.3 79