Reference Guide

Table 227. --IrstTimer (continued)
Attribute Details Description
Configures the timeout value (in minutes) for Intel Rapid Start Technology (IRST) mode. After
the set timeout, the system enters IRST mode from the S3 system sleep mode. The acceptable
values are in the range 0-999.
--IntelReadyModeEn
Table 228. --IntelReadyModeEn
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables Intel Ready Mode Technology (iRMT).
--IsochronousMode
Table 229. --IsochronousMode
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables System Isochronous mode.
NOTE: Isochronous mode may be best for audio and video streaming applications.
● Enabled — Enable this mode to reduce the latency of memory transactions at the expense
of bandwidth.
● Disabled — Disable this mode for applications that need high memory bandwidth.
--KbdBacklightTimeoutAc
Table 230. --KbdBacklightTimeoutAc
Attribute Details Description
Valid Argument 5s, 10s, 15s, 30s, 1m, 5m, 15m, Never
Configures the timeout value for the keyboard backlight when an AC adapter is plugged into
the system.
● 5s — Keyboard backlight stays on for 5 seconds.
● 10s — Keyboard backlight stays on for 10 seconds.
● 15s — Keyboard backlight stays on for 15 seconds.
● 30s — Keyboard backlight stays on for 30 seconds.
● 1m — Keyboard backlight stays on for 1 minute.
● 5m — Keyboard backlight stays on for 5 minutes.
● 15m — Keyboard backlight stays on for 15 minutes.
● Never — Keyboard backlight always stays on.
--KbdBacklightTimeoutBatt
Table 231. --KbdBacklightTimeoutBatt
Attribute Details Description
Valid Argument 5s, 10s, 15s, 30s, 1m, 5m, 15m, Never
74 Options for Dell Command | Configure 4.3