Reference Guide

--HddFailOver
Table 191. --HddFailOver
Attribute Details Description
Valid Argument Enabled, Disabled
Specifies the devices in the hard disk drive sequence menu that are attempted in the boot
sequence. If set to off, only the first device is attempted in the boot sequence. If set to on, all
devices are attempted as listed in the hard disk drive sequence.
--HddInfo
Table 192. --HddInfo
Attribute Details Description
Valid Argument Read-only
The option displays the details of the HDD. The information displays the name of the HDD
(HDD Name), whether the HDD is physically present (Present), whether a password exists
for the HDD (Pwd-Protected), whether a reboot is required to set the password
(Pending-Restart), and whether the changes to the password can be made only by an
administrator (Admin-only-change).
Example
C:\>cctk --HddInfo
HDD Information in the current system.
Index: 0
HDD Name: Internal
Present: Yes
Pwd-Protected: No
Pending-Restart: No
Admin-only-change: No
--HddProtection
Table 193. --HddProtection
Attribute Details Description
Valid Argument Enabled, Disabled
Turns the HDD protection feature on or off. The Hard Disk Protection is an advanced feature
intended to keep the HDD data secure and unchangeable. For more details on this feature, see
the documentation provided with your system.
--HddPwd
Table 194. --HddPwd
Attribute Details Description
Valid Argument <password>
Sets the hard disk drive password. The password cannot be reported. To set the password an
argument is required. To remove the password, provide one blank space and the old password.
NOTE: Reboot the system to complete any HDD password actions.
Options for Dell Command | Configure 4.3 67