Reference Guide

--Decrypt
Table 111. --Decrypt
Attribute Details Description
Valid Argument Read-only
Allow to Decrypt.
--DeepSleepCtrl
Table 112. --DeepSleepCtrl
Attribute Details Description
Valid Argument S5Only, S4AndS5, Disabled
Configures the system power mode when the system is in s4 and s5 state. If set to S5Only,
the system moves to the lowest-power off mode when in s5 state. If set to S4AndS5 state,
the system moves to the lowest-power off mode when in s4 and s5 states. When the system is
in a low-power mode, it turns off most of the power-consuming circuitry devices, to meet the 1
W power limit. It disables the Power Management Event (PME), USB power, and so on.
--DisGpuExtDisplay
Table 113. --DisGpuExtDisplay
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the platform external displays.
NOTE: Embedded Display Port (eDP) will be enabled by Integrated Graphics Processing Unit
(iGPU).
● Enabled — Allows discrete Graphics Processing Unit (dGPU) to enable the platform external
displays such as HDMI, NB DP, Type-C, and so on with the purpose of enabling discrete graphic
features such as Eyefinity, Mosaic, 10bit DP displays, etc..
● Disabled — The normal hybrid graphics mode is enabled.
NOTE: This feature is used in hybrid graphics mode only.
--DisableDockDevicesexceptVideo
Table 114. --DeepSleepCtrl
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables all the non-video devices (serial, audio, LAN, and USB ports) on a rugged
dock.
--DisBluetoothRadio
Table 115. --DisBluetoothRadio
Attribute Details Description
Valid Argument Enabled, Disabled
Options for Dell Command | Configure 4.3 51