Reference Guide

--WirelessSwitchWlanCtrl
Table 544. --WirelessSwitchWlanCtrl
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the effect of physical wireless switch on wireless LAN and WiGig radio.
● Enabled — If the wireless physical switch is on, turns the wireless LAN on and WiGig radio
on. If the wireless switch is off, turns the wireless LAN on and WiGig radio off.
● Disabled — The wireless physical switch does not effect the wireless LAN and WiGig
radios.
--WirelessSwitchGps
Table 545. --WirelessSwitchGps
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the effect of physical wireless switch on the GPS radio of the wireless
WAN card.
● Enabled — If enabled, wireless switch turns the GPS radio of the wireless WAN card on or
off.
● Disabled — If disabled, wireless switch does not have any effect on the state of the GPS
radio of the wireless WAN card.
--WwanAutoSense
Table 546. --WwanAutoSense
Attribute Details Description
Valid Argument Enabled, Disabled
When enabled, this feature disables the WWAN radio if the system is connected to a wired
network and vice-versa.
--WWanBusMode
Table 547. --WWanBusMode
Attribute Details Description
Valid Argument PcieMode
UsbMode
WWanBusMode sets the interface type of the Wireless Wan (WWAN) card. It is recommended
that the system running Microsoft Windows must set this field to PCIe, while all the other
systems must set this field to USB.
Options for Dell Command | Configure 4.3 141