Reference Guide

--Touchscreen
Table 436. --Touchscreen
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the touchscreen of the device.
--TpmSecurity
Table 437. --TpmSecurity
Attribute Details Description
Valid Argument Enabled, Disabled
Turns the Trusted Platform Module (TPM) on or off.
--TpmActivation
Table 438. --TpmActivation
Attribute Details Description
Valid Argument Enabled, Disabled
Remotely enables the TPM depending on certain security criteria. The disabled option is a read-
only argument for reporting the current activation state of the TPM.
To activate TPM,
● Password must be set
● TPM must not be owned
● TPM must be disabled
For more information, see Dell Command | Configure User’s Guide at dell.com/
dellclientcommandsuitemanuals.
For more information, see Dell Command | Configure User’s Guide.
--TpmClear
Table 439. --TpmClear
Attribute Details Description
Valid Argument Enabled, Disabled
When you enable TpmClear, TPM ownership is cleared at the next boot, and the system
firmware sets the value of TpmClear to disabled. When you disable TpmClear, TPM ownership
remains unchanged.
NOTE:
Admin password is required to enable or disable this feature using Dell Command | Configure.
Options for Dell Command | Configure 4.3 119