Reference Guide

--SysId
Table 417. --SysId
Attribute Details Description
Valid Argument Read-only
Displays the Dell System’s ID byte for systems that support it. The value of this feature is -1 if
the system does not support it.
--SysLogoOnIrst
Table 418. --SysLogoOnIrst
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables displaying the system logo from cache, during system resume using Intel
Rapid Start Technology.
● Enabled — Enables displaying the system logo from cache, during system resume using
Intel Rapid Start Technology.
● Disabled — Disables displaying the system logo from cache, during system resume using
Intel Rapid Start Technology.
--SysName
Table 419. --SysName
Attribute Details Description
Valid Argument Read-only
Displays name of the system.
--SysPwd
Table 420. --SysPwd
Attribute Details Description
Valid Argument <password>
Sets the system password. An argument is required. The password cannot be reported. Initially
you can set the password using Dell Command | Configure. If you want to remove the
password, provide one blank space and the old password.
Example
NOTE: Password containing special characters must be provided in double inverted
commas (“”).
To set the password:
C:\>cctk --SysPwd=<new-password>
To change the password:
C:\>cctk --SysPwd=<old-password> --ValSysPwd=<new-password>
To remove the password:
C:\>cctk --SysPwd= --ValSysPwd=<old-password>
Options for Dell Command | Configure 4.3 115