Reference Guide

--SecureBootMode
Table 371. --SecureBootMode
Attribute Details Description
Valid Argument DeployedMode, AuditMode
Allows the modification of secure boot operational mode.
Deployed mode is the normal mode of operation for measuring the UEFI executable images.
Audit Mode enables the evaluation of changes to the Secure Boot key database.
NOTE: Attempting the transition to Audit Mode by writing '1' to the DA Token may fail if
the system is not in OSMM.
--SoftGuardEn
Table 372. --SoftGuardEn
Attribute Details Description
Valid Argument Enabled, Disabled, SoftControlled
Configures Secure Guard Extensions (SGX) feature. You can select Enabled or SoftControlled
if this option is disabled.
--SedBlockSidAuthentication
Table 373. --SedBlockSidAuthentication
Attribute Details Description
Valid Argument Enabled, Disabled
When there is no drive ownership and the blocksid is enabled, the BIOS sends the
SedBlockSidAuthentication authentication command to SED drives. When disabled, the BIOS
does not send the Block SID command.
NOTE: You can disable SedBlockSidAuthentication in manufacturing mode or while setting
up the BIOS Setup Administrator password.
--Serial1
Table 374. --Serial1
Attribute Details Description
Valid Argument Disabled, Auto, Com1,Com2, Com3, Com4, Com1_bmc, BmcSerial, BmcLan, Rac, Rs232, Rs422,
Rs485
Configures the 1st serial port of the system.
--Serial2
Table 375. --Serial2
Attribute Details Description
Valid Argument Disabled, Auto, Com2, Com4, Rs232, Rs422, Rs485
Configures the 2nd serial port of the system.
Options for Dell Command | Configure 4.3 105