Reference Guide

Table 327. --PciResAllocationRatio (continued)
Attribute Details Description
Allocates PCI resources, buses, memory-mapped I/O (MMIO) space, and I/O space. If set to
AllocateEvenly, equal amount of memory is allocated to all the resources when two CPUs are
installed. When set to AllocateMoreToCpu1, larger amount of device-specific memory is
allocated, which in turn reduces the usable memory on a system with a 32-bit operating
system.
--PciSata
Table 328. --PciSata
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the PCI Serial ATA controller.
--PciSlots
Table 329. --PciSlots
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the add-in PCI slots of the system.
--Pcmcia
Table 330. --Pcmcia
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the PCMCIA device slot.
--PeakShiftBatteryThreshold
Table 331. --PeakShiftBatteryThreshold
Attribute Details Description
Valid Argument integers ranging from 15 to 100
Sets the value of Peak Shift battery threshold. When the Peak Shift battery threshold level is
reached, the system starts using AC power. Setting the value to 00 percent allows the system
to use power only from the battery during Peak Shift duration (Peak Shift Start time and Peak
shift End time).
Example
C:\>cctk --PeakShiftBatteryThreshold=50
PeakShiftBatteryThreshold=50
Options for Dell Command | Configure 4.x 95