Reference Guide

--MasterPasswordLockout
Table 265. --MasterPasswordLockout
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the master password settings.
CAUTION: You cannot disable this feature using Dell Command | Configure.
● Enabled—The master password cannot be used to
○ clear other passwords
○ unlock and access hard disk drive
○ erase data from hard disk drive
● Disabled—The master password can be used to
○ clear other passwords
○ unlock and access hard disk drive
○ erase data from hard disk drive
NOTE: One of the methods of configuring Master Password Lockout feature is from the
BIOS setup screen.
NOTE: You cannot enable MasterPasswordLockout while setting up with Hdd or Owner's
password.
--MediaCard
Table 266. --MediaCard
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the media card.
--MediaCardAnd1394
Table 267. --MediaCardAnd1394
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the media card and 1394 devices.
--Mem
Table 268. --Mem
Attribute Details Description
Valid Argument Read-only
Displays the amount of system memory physically installed in the system, not the amount of
memory available to an operating system. The last two characters of the memory value
indicate the order of magnitude used (Kilo Byte (KB) or Mega Byte (MB)).
82 Options for Dell Command | Configure 4.x