Reference Guide

Table 195. --HddInfo (continued)
Attribute Details Description
The option displays the details of the HDD. The information displays the name of the HDD
(HDD Name), whether the HDD is physically present (Present), whether a password exists
for the HDD (Pwd-Protected), whether a reboot is required to set the password
(Pending-Restart), and whether the changes to the password can be made only by an
administrator (Admin-only-change).
Example
C:\>cctk --HddInfo
HDD Information in the current system.
Index: 0
HDD Name: Internal
Present: Yes
Pwd-Protected: No
Pending-Restart: No
Admin-only-change: No
--HddProtection
Table 196. --HddProtection
Attribute Details Description
Valid Argument Enabled, Disabled
Turns the HDD protection feature on or off. The Hard Disk Protection is an advanced feature
intended to keep the HDD data secure and unchangeable. For more details on this feature, see
the documentation provided with your system.
--HddPwd
Table 197. --HddPwd
Attribute Details Description
Valid Argument <password>
Sets the hard disk drive password. The password cannot be reported. To set the password an
argument is required. To remove the password, provide one blank space and the old password.
NOTE: Reboot the system to complete any HDD password actions.
--HotDock
Table 198. --HotDock
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables hot docking or undocking.
--HdFreeFallProtect
Table 199. --HdFreeFallProtect
Attribute Details Description
Valid Argument Enabled, Disabled
Options for Dell Command | Configure 4.x 67